xxxx = product type marking code, ex. es1 a = manufacturers? code marking yww = date code marking y = last digit of year ex: 2 for 2002 ww = week code 01 to 52 yww xxxx ds14001 rev. 11 - 2 1 of 3 es1a - es1g www.diodes.com diodes incorporated es1a - es1g 1.0a surface mount super-fast rectifier glass passivated die construction super-fast recovery time for high efficiency low forward voltage drop and high current capability surge overload rating to 30a peak ideally suited for automated assembly lead free finish/rohs compliant (note 5) single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. a b c d g h e j sma dim min max a 2.29 2.92 b 4.00 4.60 c 1.27 1.63 d 0.15 0.31 e 4.80 5.59 g 0.10 0.20 h 0.76 1.52 j 2.01 2.30 all dimensions in mm characteristic symbol es1a es1b es1c es1d es1g unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 150 200 400 v rms reverse voltage v r(rms) 35 70 105 140 280 v average rectified output current @ t t = 110 c i o 1.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 30 a forward voltage drop @ i f = 0.6a @ i f = 1.0a v fm 0.90 0.98 1.25 v peak reverse current @ t a = 25 c at rated dc blocking voltage @ t a = 100 c i rm 5.0 200 a reverse recovery time (note 1) t rr 25 35 ns typical total capacitance (note 2) c t 10 pf typical thermal resistance, junction to terminal (note 3) r jt 40 c/w operating and storage temperature range t j, t stg -65 to +150 c notes: 1. measured with i f = 0.5a, i r = 1.0a, i rr = 0.25a. see figure 5. 2. measured at 1.0mhz and applied reverse voltage of 4.0v dc. 3. unit mounted on pc board with 5.0 mm 2 (0.013 mm thick) copper pad as heat sink. 4. for packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. *x = device type, e.g. es1a-13-f . 5. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7. marking information device * packaging shipping es1x-13-f sma 5000/tape & reel ordering information (note 4) maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified features mechanical data case: sma case material: molded plastic. ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: lead free plating (matte tin finish). solderable per mil-std-202, method 208 polarity: cathode band or cathode notch marking: type number & date code: see below ordering information: see below weight: 0.064 grams (approximate)
ds14001 rev. 11 - 2 2 of 3 es1a - es1g www.diodes.com 0 10 20 30 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 sur g e current deratin g curve single half-sine-wave (jedec method) 0.1 1.0 10 100 0 40 80 120 percent of rated peak reverse voltage (%) fi g .4 t y pical reverse characteristics t=100c j t=25c j 0 0.5 25 50 75 100 125 150 175 i , average rectified current (a) o t , terminal temperature ( c) fi g . 1 forward current deratin g curve t 1.0 1 .5 50v dc approx oscilloscope (note 1) pulse generator (note 2) device under te s t t rr set time base for 50/100 ns/cm +0.5a 0a -0.25a -1.0a fi g . 5 reverse recover y time characteristic and test circuit (+) (+) (-) (-) 0.01 0.1 1.0 10 0 0.4 0.8 1.2 1.6 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fi g .2 t y pical forward characteristics f t=25c j es1a - es1d es1g
ds14001 rev. 11 - 2 3 of 3 es1a - es1g www.diodes.com important notice life support www.diodes.com diodes, inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhance- ments, improvements, or other changes. diodes, inc. does not assume any liability arising out of the application or use of any product described herei n; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on our website, harmless against all damages. the products located on our website at are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the express written approval of diodes incorporated.
|
